Bernd Krebs Posted August 13, 2012 Report Share Posted August 13, 2012 I am in need of the two trim cable clamps that hold the cables to the elevator tube, left/right, any help would be appreciated. Bernd at airfritz at aol dot com Link to comment Share on other sites More sharing options...
dietmargrosz Posted August 28, 2012 Report Share Posted August 28, 2012 Servus Bernd, Ich habe einfach Schlauchschellen genommen, meist werden auch nur sehr starke Kabelbinder verwendet. Kann Dir gerne auch Fotos mailen. liebe Grüße aus Österreich, Dietmar N59GD PT22@gmx.at Link to comment Share on other sites More sharing options...
Bernd Krebs Posted August 29, 2012 Author Report Share Posted August 29, 2012 Dietmar My Germam/Austrian is a bit rusty (too many years this side of the pond) if you have these clamps and can send a picture that would be very helpfull Bernd Ryan N48608 Link to comment Share on other sites More sharing options...
Bernd Krebs Posted February 27, 2014 Author Report Share Posted February 27, 2014 Still in need of those pesky clamps, does anyone have them or a sample that I can copy Thank you Bernd Link to comment Share on other sites More sharing options...
N48748 Posted March 6, 2014 Report Share Posted March 6, 2014 Bernd, I think most aircraft - at least those I've seen, including mine - have been fitted with simple hose clamps at the elevator tubes. It isn't a very elegant installation, but functional. I've also added caterpillar chafe strips to the aft fuselage cutout, as a bit of protection. I'll check the microfilm to see if I can find drawing of the factory configuration, and would love to hear from anybody having the correct, or better, scheme Best Regards, Bob Roth Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.