Jump to content
Sign in to follow this  
Speeddemon651

PT-22 gear spreader bar measurements.

Recommended Posts

Can anyone tell me the exact measurement from center tow eye to center tow eye on a Ryan PT-22 is ?

I'm going to help transport one shortly and I need to make a spreader bar for gear so the wings can be removed.

Thanks in advance.

JH

Share this post


Link to post
Share on other sites

Glad to help!  I made my bar out of 1" angle.  Cut a couple of 2" long pieces for each end, drilled a 1/2" hole through each end of the long piece and through each short piece.  Sandwiched the tow eye between the pieces and fastened with a 7/16" bolt and nylok nut.

image.jpeg

Share this post


Link to post
Share on other sites
Sign in to follow this  

×